Energy
Our state-of-the-art solutions enable the generation and distribution of electricity.
Our company specialises in low- and high-voltage installations in all types of premises. Our many years of experience and expertise allow us to guarantee you the highest quality of workmanship.
We have carried out the following for our clients:
Energy generation
Contracting Authority: Mitsubishi Hitachi Power Systems Europe GmbH
Project period: Q2 2020 – Q4 2020
Scope of work: installation of electrical systems
Investor/Client: Veolia Energia Poznań S.A.
Project period: Q2 2018 – Q1 2019
Scope of works: including the supply and installation of a new 6kV switchgear, section A and section B – a total of 44 panels
Main Contractor: RAFAKO S.A.
Project duration: Q1 2019 – Q3 2020
Scope of work: design, supply, installation and commissioning of electrical works on a turnkey basis for Flue Gas Desulphurisation Plant II for units 1, 2 and 3 at the Ostrołęka B Power Station
Project: Installation of electrical systems for the CFB boiler at the Konin
Power Station Client: EL PAK Sp. z o.o. (Automation and Electrical Equipment Service Company)
Completion period: Q1 2011 – Q3 2011
Scope of work: Installation of equipment (transformers, inverter cabinets, UPS units, DC switchgear); supply and installation of cable routes; supply and installation of cables, including fire seals and measurements; supply and installation of earthing systems; cable structures; as-built documentation
Project: Construction of a 460 MW unit at the Pątnów II
Power Station Investor: Pątnów
Power Station Client: SNC LAVALIN Polska Sp. z o.o.
Project duration: Q3 2007 – Q3 2008
Scope of work: Installation of plug-in and power sockets, control and measurement instrumentation and automation systems, cable routes.
Investor: ENEA Wytwarzanie Sp. z o.o.
Project duration: Q4 2019 – Q3 2020
Scope of work: modernisation of the 6 kV switchgear Z1, WC1, WC2, P4 and 24/220 V DC TPS/P4, including design documentation
Contracting Authority: Mitsubishi Hitachi Power Systems Europe GmbH
Project period: Q2 2020 – Q4 2020
Scope of work: installation of electrical systems
Investor/Client: Veolia Energia Poznań S.A.
Project period: Q3 2016 – Q4 2017
Scope of work: including the supply and installation of a new 6kV RKW switchgear of the ODRA 12 type – a total of 17 bays
Construction: Installation of a Wet Flue Gas Desulphurisation System at the Siekierki Combined Heat and Power Plant in Warsaw
Main contractor: Rafako Boiler Works
Project duration: Q4 2008 – Q4 2011
The scope of works carried out by our company generally includes: Basic and detailed design, modernisation of the power
output from four units and the wet flue gas desulphurisation plant (MIOS); electrical installations – power output – carried out in two stages, electrical installations for the wet flue gas desulphurisation system (MIOS) – carried out in two stages.
Project: Flue gas desulphurisation plant at the Ostrołęka B
Power Station Client: Zespół Elektrowni Ostrołęka S.A.
Contracting Authority: RAFAKO
Boiler Works Project duration: Q3 2006 – Q4 2007
Scope of work: Supply and installation of 6kV cable lines, 0.4kV cable lines, electrical installations for flue gas desulphurisation technology, and general electrical installations for the facilities.
Supply and installation of 20 bays of the main 6kV Odra switchgear in the Flue Gas Desulphurisation Plant (manufactured by ZPUE Elektromontaż Poznań), 19 panels of the 0.4kV Warta switchgear (manufactured by ZPUE Elektromontaż Poznań)
Main Contractor: RAFAKO S.A.
Project period: Q2 2020 – Q3 2020
Scope of work: supply, installation and commissioning of MV and LV switchgear for the IOS of units 9 and 10
Main power supply points
Construction: Construction of a HV/LV substation in Piastowice
Client: ENEA Operator Sp. z o.o.
Project duration: Q1 2011 – Q1 2012
Scope of work: Design documentation and construction works: construction and commissioning of a HV/MV substation together with associated infrastructure; supply of the HV/MV substation via two single-circuit 110 kV overhead lines; construction of access and internal roads, including a car park; construction of connections to the existing water supply network; commissioning of telecontrol and remote monitoring systems and mapping of switchgear statuses, automation and measurements; commissioning of data transmission from electricity metering systems.
Construction: Construction of a new 110/15 kV substation on the premises of the Bridgestone production plant in Poznań
Client: Bridgestone Poznań
Construction period: Q1 2007– Q3 2007
Scope of works: External installations: laying of 110 kV HV cable, replacement of 15 kV LV cable; Internal high-voltage installations: construction of the 110/15 kV substation, supply and installation of a 35-pole dual-system, two-section BRDA switchgear (manufactured by ZPUE Elektromontaż Poznań), internal installations within the 110/15 kV substation building
Client: KGHM Polska Miedź S.A., Rudna Mining Plant
Project duration: Q4 2016 – Q2 2018
Scope of work: execution of construction and installation works involving the modernisation of primary, secondary, control, signalling, telecommunications, telemechanics, protection, automation and electricity metering and billing systems at the 110/6kV KRP “PIESZKOWICE” substation
Construction: Design of the main distribution substation for the Tychowo wind farm
Client: Megawatt Baltica Main contractor: Elektromontaz Poznań S.A.
Project period: Q2 2008 – Q4 2008
Scope of work: 30 kV cable lines:
20 wind turbines of the “Tychowo” power plant complex are connected by: 17.85 km of 30 kV cable line (including fibre-optic ducting) to the (GPZ) Tychowo, 2 km of 110 kV overhead line, full-scope construction of the 30/110 kV GPZ substation, substation buildings, internal roads, foundations for switchgear, SCADA telemechanics.
The detailed scope of our company’s work includes, amongst other things, the supply and commissioning of: a 63 kVA three-phase oil-filled overhead transformer for internal use, a three-pole 123 kV/31.5 kA/3150 A overhead circuit breaker, a 123 kV HV combined current-voltage transformer, a 123 kV HV current transformer, nine 30 kV MV switchgear bays, a set of LV switchgear (in-house supply, secondary circuits, control and setting circuits).
Construction: The ‘Bema’ 110/15 kV main substation in Poznań
Client: Zakład Energetyczny Poznań
Duration: 4 quarters
Scope of work: Elektromontaż Poznań carried out the project as the main contractor. The contract covered comprehensive construction, water and sewerage works, and high-voltage electrical works. Piling for the 110 kV
switchgear was also carried out, along with the installation of poles, 110 kV circuit breakers, disconnectors, current and voltage transformers, the installation of lightning arresters and 110 kV overhead line branches, as well as the installation of MV switchgear, control and measurement cabinets, and protection equipment.
